Zünd 2

Startup

1. Unlock your machine with the ETH card
2. Turn on the computer
3. Open the template “Zünd_Template_Porthos” (Desktop)
4. Import your vector drawing (pdf, dxf) with the command “File” > “Import”
5. Place the material on the machine. When placing your material, please note the orientation of the X- & Y-Axis.
6. Cover up the area behind your material to ensure the vacuum power.
   

Cut

1. Type “Z_CUT” into the command window
2. Select your vectors. Confirm with enter
3. Check settings
   1. Tool=left: blade
   2. VacuumWidth: as wide as necessary
   3. Speed: standard 15
4. Confirm with enter
5. Confirm “y” with enter to send the command to the plotter
6. Press “online” (1) to start the task

Engrave

1. Type “Z_ENGRAVE” into the command window
2. Select your vectors. Confirm with enter
3. Check settings
   1. VacuumWidth: as wide as necessary
   2. Speed: standard 10
   3. Material_Thickness: in mm
4. Confirm with enter
5. Confirm “y” with enter to send the command to the plotter
6. Press “online” (1) to start the task

Draw

1. Drive over the material with the navigation keys (2)
2. Activate the pen tool (2 1 1 4) on the number board and press “enter”
3. Lower the tool (3)
4. Adjust height manually
5. Lift the tool (3)
6. Type “Z_CUT” into the command window
7. Select your vectors. Confirm with enter
8. Check settings
   1. Tool=pen
   2. VacuumWith: as wide as necessary
   3. Speed: Standard …
9. Confirm with enter
10. Confirm “y” with enter to send the command to the plotter
11. Press “online” (1) to start the task

Turn off

• Delete your files and folders
• Turn off the computer
• The plotter turns of as soon you are logged out