Sandblaster

General Information

1 machine available

In order to use this machine you must have succesfully completed the following courses:

  • general safety introduction course
  • introduction to the plaster workshop
  • Close the lid tightly
  • Wear a dust mask
  • Wait a minute before opening the lid
Please check our workshop rules for more detailed safety instructions.
  • Plaster
  • Concrete
  • Glass
  • Porcelain
  • Metall

Sandblaster Overview

  1. Power switch for light
  2. Closure of the lid
  3. Open Lid
  4. Lever for compressed air (opened position)

Inside:
Gloves and pistol

Before to start 

  • Check that the vacuum cleaner is connected to the sandblasting machine
  • Check that the gloves are airtight when connected to the machine
  • Wear a dust mask

Machine Handling

  • Turn on the vacuum cleaner
  • Open the lever for compressed air (like it’s shown in the overview picture)
  • Put the piece into the machine and close it
  • Lid must be well closed before sandblasting
  • Put your hands into the gloves and start sandblasting using the pistol
  • Blast rectangular to the object
  • Close the compressed air line after you have finished (turn it 90 degree)
  • Wait a minute to open lid and remove piece
  • If there is too much dust inside the box and you cannot see anything, please contact the workshop leader